by on October 30, 2018

After the combination Rice Whitener(LIANGGONG) is used, it must be cleaned up. How to clean the combined rice whitener?

1. Clean the sieve body should be smooth, intact, stable, and without abnormal noise.

2. Pay attention to check the grain content in the sieve under the operation, if there is too much grain, the cause should be identified and corrected.

3. When the sieve hole is blocked, it should not be beaten with iron or hard objects. The long plate brush can be used to remove the blockage; the broken surface of the sieve surface should be repaired or replaced in time.

4. There should be no collision sound during the operation of the fan. After the feed, check the stone, miscellaneous and row of stones and impurities in the raw materials. If there is too much grain in the sand, the cause should be identified and excluded.

5. go to the stone machine sieve plate and each damper should be kept open, the screen hole is blocked with a wire brush to clean, do not beat to avoid damage.

6. When adjusting the eccentric rotating mechanism, loosen the rubber pad fastening device, tighten it after tightening, so that it is in the state of no prestress.

Click Rice Polisher to learn about more information.

Posted in: Otros