lianggong
by on November 8, 2018
5 views

The Paddy Husker(LIANGGONG) is a grain processing machine that removes rice from the husks and makes brown rice. It is mainly used for the processing of rice. It can remove the outer shell of rice, reduce the bursting of rice grains and damage of the epidermis, and try to keep the brown rice intact.

Characteristics

◆ High shelling rate and low bursting rate; the machine adopts reasonable line speed difference and adjustable roller pressure, and the shelling rate reaches 90%. Burst rate is less than 5% and stable during production.

◆Easy to use; use handle adjustment, rack ruler positioning. The feed jaws are automatically aligned to the rolling distance. Fast and slow roll interchange with gearbox.

◆The operation is stable; the main rotary parts are strictly tested, the operation is stable, and the vibration force is small.

◆ Low glue consumption; good ventilation and heat dissipation device to avoid overheating and wear of rubber roller.

◆The separation effect of the chaff is good. The raw material after shelling passes through the air separator, and the mixture of the valley and the mixture is completely separated from the big one.

◆Using double support structure, the rubber roller is not easy to produce large and small head phenomenon, and the performance is stable and reliable.

Main structure and working principle

The rubber roller smashing machine is mainly composed of a hopper feeding device, a head device, a chaff separation chamber, a gear transmission, a frame, etc., and the working component is a pair of horizontal rubber rollers which are bonded or set with a rubber layer on a cast iron cylinder. Cartridge or plastic roller. The axes of the two rubber rollers are located in the same horizontal plane or slightly different heights, and are rotated at different rotational speeds. One roller is fixed in position and the other roller can be moved to adjust the rolling distance between the rollers. The difference between the line speeds of the two rolls is 2~32 m/s, and the sum of the line speeds should not exceed 30 m/s; the rice is fed evenly over the entire length of the rubber roll by the seesaw (or via the feed rolls and the jaws). Between the rolls, the equal-diameter rolls are reversely rotated at different line speeds, and the pressure between the rolls is pressed and torn by the pressure of the pressing. Due to the extrusion of two rolls and the tearing effect caused by the difference between the speeds of the two rolls, most of the rice reaches the purpose of shelling, enters the chaff separation device, and then absorbs at a wind speed of 4~5 m/s through the suction port. rice husk. After the grain mixture is separated from the rice husk, the grain mixture is discharged from the discharge raft.

Click Paddy Separator to learn about more information.

Posted in: Otros
Topics: paddy husker